Re: Measuring RPM on a Magneto Tractor

Posted by Kevin (FL) on September 01, 2004 at 12:38:11 from (12.77.201.16):

In Reply to: Measuring RPM on a Magneto Tractor posted by Steve W (NY) on September 01, 2004 at 11:34:35:

Steve,

Can't help you out with the dwell/tach hook-up on a mag engine, but soon we'll have to figure the same thing out on our AC B model. As a work-around, you can borrow a strobe tach from someone and use that. To use one of these you will need to put a piece of reflective tape on the crankshaft pulley or any other pulley that has a 1:1 ratio with the crank.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]