Re: I need a foolproof head seal on H

Posted by MagMan on September 04, 2004 at 14:30:11 from (152.163.253.103):

In Reply to: I need a foolproof head seal on H posted by Red Dread on September 04, 2004 at 12:08:53:

I use spray Tac from Napa Just a light coat on head and block none on gasket Its a red spray adhesive made by permatec I think. AS far as torq goes I would do 25,35,45,60 then 67 Not that you did anything wrong it only takes a few extra minutes. The 50 to 70 you did has alot of torq in between.Also did you have a old style gasket or new some some of the dealers try to give the one that have the steel on one side and cardboard or what ever it is on the other. I also go with the double steel no retorque like they have on cars. Just My Thoughts JON

Follow Ups:

• Re: I need a foolproof head seal on H Red Dread 14:42:32 09/04/04 (2)
  • Re: I need a foolproof head seal on H ChadS 16:16:19 09/04/04 (1)
    • Re: I need a foolproof head seal on H MagMan 16:41:10 09/04/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]