Re: Battery cable ends

Posted by El Toro on September 07, 2004 at 16:49:19 from (170.224.224.102):

In Reply to: Battery cable ends posted by Bob Quale on September 07, 2004 at 14:05:58:

Hi Bob, You can purchase battery lugs or spades
from most automotive stores and you can solder them yourself. A propane torch will furnish enough heat to solder them. Clean the lugs inside surface with steel wool or a small wire brush so they are nice and shiny. Then apply
flux to the lugs and to the cable ends. We used crimpers too, but it takes a large crimper to do the larger cables. Good Luck, Hal

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]