H HEAD

Posted by old tom on September 17, 2004 at 08:50:50 from (64.81.231.196):

We pulled the head on our H today.Have never been able to get it to run right always seemed to have a miss. If you pulled the plug wire from each plug while motor was running it would be noticable at each cylinder, A comp check showed 90# at each cyl. We noticed a little water in the oil.Upon examing the head we found a visable crack from one of the water holes to a stud bolt hole. This could account for the water in the oil but would it make the tractor miss also. It could be the head has more cracks but after finding this one we hate to spend the money for cleaning and maxnuflux. Are there used or rebult heads available. Thank you for your time in reading this.

Follow Ups:

• Re: H HEAD Red Dread 18:33:44 09/17/04 (0)
• Re: H HEAD Red Dread 18:26:04 09/17/04 (0)
• Re: H HEAD Jim J 16:02:58 09/17/04 (0)
• Re: H HEAD L.M. 10:56:54 09/17/04 (0)
• Re: H HEAD justin w 08:52:15 09/17/04 (1)
  • Re: H HEAD MagMan 11:29:58 09/17/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]