Re: HM Hydraulics--again

Posted by Theman on September 17, 2004 at 14:32:04 from (65.248.77.5):

In Reply to: Re: HM Hydraulics--again posted by Charles in Indiana on September 17, 2004 at 13:33:04:

Charles, you didn't say what model your tractor is, but if it is an M or H, the Liftall pump is filled at the cast iron pipe cap above the clutch housing next to the battery. There should be a dipstick under the cap. If the dipstick is missing, which a lot of them are, retract all lift cylinders and fill to about 5" from the top of the pipe. If you fill the unit with the cylinders extended, it can overflow when you lower everything making a big mess. If the cylinder(s) doesn't fully extend, add more fluid.

Follow Ups:

• Re: HM Hydraulics--again Charles in Indiana 17:20:18 09/17/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]