Re: Cub restoration tips

Posted by JRB IN MAINE on September 20, 2004 at 18:26:40 from (24.198.78.55):

In Reply to: Cub restoration tips posted by Bandit on September 20, 2004 at 17:38:24:

Restored a H and only used 2 qts of paint thru out hole tractor being red paint. pint of silver for rims .if the tin is pitted sand blast and use eching red primer to stop rust and then use hibuild primer sevral times.wet sand with 600 grit then paint will give you alot better finish. paint tin first can use a single stage so no clear is needed.while tractor is on blocks paint chassie rims off of hubs .let dry 24 hours before you put back to getther small parts will have to be painted seprate like lights brackets anything small ect... will take time but will look great after you are finished . take your time it will all come together in time . have fun !

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]