Re: Has anyone ever adjusted pressure plate finger

Posted by Dave in CT on September 22, 2004 at 08:59:02 from (64.252.230.32):

In Reply to: Has anyone ever adjusted pressure plate fingers? posted by Georgia Boy on September 21, 2004 at 19:59:43:

I had a problem with my H clutch release levers going out of adjustment and not releasing the clutch when I stepped on the pedal. I adjusted the levers so they had about 1/8" to 1/16" clearance (I forget what the spec is so check your manual), tightened the locking nuts down and the clutch has been fine ever since. It may be difficult to get all the fingers at just the right clearance but having the clearance even on them is important. For the H, I rotated the engine by locking in the belt pulley drive and turning the hub the pulley bolts on to.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]