Re: W4 electrical

Posted by Bob on September 27, 2004 at 10:24:38 from (66.163.134.177):

In Reply to: W4 electrical posted by Joe W. P. on September 27, 2004 at 09:49:35:

Use an analog voltmeter to verify that the regulator is maintaining the voltage at about 7.4 Volts, for proper charging of the battery.

The amps will start high, and fall as the battery charges, but after a couple of minutes after starting (with the engine revved a bit off of idle), the voltage should rise to about 7.4 Volts and stay there. Being able to get the charging voltage up to that level, and not rise much above is a more accurate measurement of charging system performance than an ammeter.

Follow Ups:

• Re: W4 electrical Joe W. P. 13:18:00 09/27/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]