Re: Super A: Questions

Posted by BIG JOHN on October 01, 2004 at 18:15:37 from (205.188.117.22):

In Reply to: Super A: Questions posted by PaulG on October 01, 2004 at 06:13:53:

Since no one else came back on the oil pressure I will. Pull the pan off (it probably has a thick layer of gunk that needs to be cleaned out anyway) then remove the bottom plate from the oil pump.

This plate is probably no longer perfectlly flat from ware and tear. Get some emery paper and a very flat surface and go to work sanding it down to a perfectlly flat surface.

Or take it to a machine shop and have them true up the surface. Be sure to get a new gasket from CIH to reassemble it with. This is the thinest gasket you have ever seen.

You should see a marked improvement in your oil pressure.

GOOD LUCK

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]