Re: No spark on Farmall Cub

Posted by El Toro on October 23, 2004 at 15:20:53 from (64.12.117.13):

In Reply to: No spark on Farmall Cub posted by Magnut28 on October 23, 2004 at 14:37:18:

Does this tractor have a distributor or a magneto?
I think you should rotate the engine until NO1
piston is at TDC on the compression stroke. The notch on the pulley should aliign with the pointer
on the crankcase front cover.

Your rotor should be at No1 position. If it is check your plug wire to the sparkplug. The rotor rotates clockwise so the next plug wire is to No3, No4 and No2.

If it is a distributor set point gap to
.020". A magneto setting is .013". Make sure none of wires on your points are touching and are grounding out. If you have a point file or some 320 emery cloth rub those new points. Hal

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]