CaseIH carb kit for Farmall M

Posted by Marlin M '51 on October 29, 2004 at 05:20:32 from (63.252.188.93):

I put a carb kit in my "51 M last night. The kit came from the CaseIH dealer. In the kit was a fiber cylinder that is the same diameter as the lower metering needle packing nut opening in the bowl. Is this the packing for that needle? I installed it as the packing and installed the packing nut as tight as I could get it, but the needle doesn"t feel quite tight enough. Should I add something else as packing? Also, the directions state that the float should 1 5/16 at the highest point above the casting. I"m assuming that they mean when the upper portion of the carb is upside down and the float is in the closed position. Is that correct? Thanks for the help.

Follow Ups:

• Re: CaseIH carb kit for Farmall M CNKS 18:39:50 10/29/04 (2)
  • Re: CaseIH carb kit for Farmall M Marlin M '51 02:33:57 10/30/04 (1)
    • Re: CaseIH carb kit for Farmall M CNKS 13:45:43 10/30/04 (0)
• Re: CaseIH carb kit for Farmall M Andy Martin 07:13:56 10/29/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]