Farmall & IHC Tractors Discussion Board |
Re: Can't get my 966 in thrid or forth gear
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by K.B.-826 on October 31, 2004 at 17:42:40 from (209.163.30.20):
In Reply to: Can't get my 966 in thrid or forth gear posted by ugly jim on October 31, 2004 at 06:15:20:
Jim, sounds like you need to do a little more checking here. Start out by removing the sheetmetal over the dash. Find the 1-2-3-4 linkage, move the shift lever, and check to see if anything is interfering with the linkage. If not, unhook the adjuster that connects the horizontal shaft coming from the shift lever to the vertical shaft going down to the transmission. Try to shift the tractor by turning the vertical shaft by hand. If you still can't get into 3 and 4, you might have a problem under the cover, since 1 and 2 are shifted by one shift cam, and 3 and 4 are shifted by another shift cam. Lets hope it isn't that, since the whole fuel tank/steering column assembly needs to be removed to get the shift cover off.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Fordson F Ignition System - by Anthony West. A fellow restorer contacted me earlier this year asking for some help and advice on a model F that he was restoring. He had over a period of months spent a fair amount of his hard earned cash on replacement parts for the old "trembler" ignition. Sadly though all his efforts seemed to be a waste of time and money as he still couldn''t get the temperamental old thing to run correctly!! If i said that this was a little frustrating for him that would be "conservative" in fact the problem had reduce
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|