Re: Cam shaft question

Posted by Haas on November 24, 2004 at 06:18:33 from (12.65.31.127):

In Reply to: Cam shaft question posted by Slappy on November 24, 2004 at 03:07:34:

I think Chad is correct, the cam will work. However, there was a change along the way in the H cam. The retainer nut at the front was originally right hand threads. Newer cams have lefthand threads and nuts there. The reason is that there was trouble with the nut coming off due to the shaft rotation, so the threads were changed to left hand. So be sure to get the nut with your cam in case the one you have is righthand, as I am sure the Super H would have the lefthand threads.

Follow Ups:

• Re: Cam shaft question ChadS 09:12:02 11/24/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]