Re: 1951 Farmall H Transmission Noise.

Posted by Farmallhal on December 07, 2004 at 19:10:40 from (216.106.33.84):

In Reply to: Re: 1951 Farmall H Transmission Noise. posted by John M on December 07, 2004 at 16:41:04:

John, thanks for the post and from what I read the bearing must just be a slip fit on the countershaft - is that correct? It isn't pressed on or special removal tools required I'm guessing from your post. I'm reading just get the belly pump drive shaft out of the way and remove the bearing cage and don't let it hit you in the face. Of course the belly pump drive link has to come off as well. I'm also guessing the transmission fluid needs to be drained also - is that correct? I've never been there before is the reason for the clarifying questions. Thanks again.

Follow Ups:

• Re: 1951 Farmall H Transmission Noise. John M 01:56:07 12/08/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]