Re: starter help on 300 U

Posted by Ibby on January 01, 2005 at 05:29:23 from (63.146.104.149):

In Reply to: starter help on 300 U posted by shushan on December 31, 2004 at 06:42:38:

In addition to all that's been done or suggested, make sure the starter mounting flange and block area is brite and clean so the current can get to ground easily. Some never-seize in there helps. Next, jump over your solenoid with a heavy cable (be careful, it WILL spark fierce!) I've had a LONG streak of bad solenoids that cause the same symptoms. You might be getting enough current thru bad contacts to spin the starter, but not the tractor.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]