Re: Setting timing correctly on my 44 H

Posted by tanner clark on January 01, 2005 at 08:26:46 from (69.243.23.210):

In Reply to: Re: Setting timing correctly on my 44 H posted by El Toro on January 01, 2005 at 06:45:04:

Hey Hal, I must have done something correct because I got it to backfire, so this must mean I set it on the exhaust stroke instead of the compression. Anyway I set it to TDC and the pointer was just in front of the single mark on the pulley. So I wired everything up and then it backfired only. Should TDC be set with the double set of notches or just the single one? It is hard doing this with the starter motor.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]