Re: More crank bearings

Posted by brtx on January 11, 2005 at 20:04:55 from (65.68.183.163):

In Reply to: More crank bearings posted by CNKS on January 11, 2005 at 18:19:12:

cnks mike the crank.that will tell you if ita out of round.new inserts will only decrease pressure if they have too much clearance.like putting standards on a ground crank.were the 2 inserts that were out of clearance beside each other?if thats the case you may want to get the line bore checked.there may have been a bearing failure in the past.on 855 cummins we always had the line bore checked.if its out of alignment it may end up stating to wear the new inserts the same way.just a thought.good luck

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]