Re: Loose sleeves in 706

Posted by captaink on January 12, 2005 at 20:15:36 from (64.33.250.37):

In Reply to: Loose sleeves in 706 posted by JW on January 12, 2005 at 18:32:04:

JW, In a perfect world, the sleeves should be tight enough that it takes some force to move them in the block. However, as long as they make sufficient contact to dissipate the heat from the combustion is really all that is necessary. This is because the sleeve is held in place between the ridge in the block and the cylinder head. If the new ones don’t fit tight, I would suggest either measuring the block with an inside micrometer or have it done at a machine shop.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]