Re: Brass bushing problem?

Posted by Buzz on January 13, 2005 at 19:11:38 from (65.143.126.133):

In Reply to: Brass bushing problem? posted by John in CT on January 13, 2005 at 18:46:24:

I suppose you said whoops when the bushing slipped right through?!??

Well, you can take a center punch and punch little dimples in the outside of your bushing. This displaces some of the brass to make the bushing slightly larger. After you pepper it with many dimples, apply some JB weld on the outside of the bushing or some red locktite and cross fingers. After installing the bushing, you could also "stake" the hole with your center punch so as to help keep the bushing in there.

Good luck.

Follow Ups:

• Re: Brass bushing problem? up north Walt 21:50:23 01/13/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]