Posted by spiffy1 on March 10, 2009 at 16:46:34 from (70.41.137.72):
The 3/4 [i.e. 3 sleeve sets] of an overall kit I aquired for that 22-36 had enough preservative [cosmoline maybe] to be annoying, yet lots of surface rust on the sleeves and pistons where it had been rubbed off [2 were assembled, 1 in the box] and enough on the wrist pins for some nice pitting as well.
I polished the first one with crocus cloth, and the pitting probably isn't deep, but deep enough that I can't just polish it away like surface rust. The fit to the rod is perfect; I almost thought I had oversize pins or undersize bushings!
0 tolerance seems like a pretty good answer to me regarding pitting here, but since the originals aren't exactly pristine either, anyone know how forgiving these can be?
Thanks! I'll see if the pictures came out and try to post those too. Noting that reminds me: I somehow didn't get pictures inside that filter yet, but am still drawing a blank [even after a dozen various goolge searches] on any info regarding a plunger assembly for these - and certainly none regarding a paper filter that would agree with it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tuning-Up Your Tractor: Plugs & Compression Testing - by Curtis Von Fange. The engine seems to run rough. In the exhaust you can hear an occasion 'poofing' sound like somethings not firing on all cylinders. Under loaded conditions the tractor seems to lack power and it belches black smoke out of the exhaust. For some reason it just doesn't want to start up without cranking and cranking the starter. All these conditions can be signals that your unit is in need of a tune up. Ok, so what is involved in a tune up? You say, swap plugs and file the points....now tha
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
