Re: moved post

Posted by mbnok on January 31, 2005 at 18:35:50 from (216.226.31.20):

In Reply to: moved post posted by CNKS on January 31, 2005 at 13:31:57:

back in the days of the stove bolt six chevy we would take a rocker and grind it slowly by eyeball on the side of a grindstone to take the wear spot out. What you need is a flat rest to the side of the stone, you can check it with a square, and then watch the face (tappet) you have and follow it until you smooth it out. I did this on the B some years ago and it worked for me. On the chevys sometimes they would use less oil, on the B I couldn't tell it wasn't using any oil anyway I just wanted to be able to adjust the the tappets easier.

Follow Ups:

• Re: moved post CNKS 19:05:19 01/31/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]