Re: How to set carb on H?

Posted by Jeff In Ontario on February 06, 2005 at 18:17:07 from (24.112.85.18):

In Reply to: How to set carb on H? posted by FMM on February 06, 2005 at 18:04:22:

FMM:

Set the idling jet screw out one turn and the bottom screw out about 2 1/2 turns. That will get you close. After it warms up, turn the bottom screw in until it starts to sputter than back open a half turn or so. --works for me!

Good Luck!
Jeff

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]