Farmall & IHC Tractors Discussion Board |
300 Utility Steering
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tractorsandhorses on February 16, 2005 at 20:09:07 from (209.62.224.245):
Here"s the story - I bought a 300 Utility about 10 years ago - it had a IH loader with it, but not mounted - someone had taken off the original power steering cylinder from the gearbox and added a hydraulic cylinder on the left drag link - the steering was very loose, and I ended up buying both new shafts for the power steering gearbox - at the same time, I found an original power steering cylinder for the IH gearbox, and teed it into the hydraulic cylinder, as the flow seemed to be equal - this worked fine for the 9 years or so that I used the tractor (with a Davis loader on it) - well to make a long story even longer, I bought a different tractor with a heavier loader and grapple, and decided to sell the 300U (without the Davis loader) - well, the first week the new owner used it, he put a 3-point bale fork on and started moving round bales (1,000 pounds or more) with no loader on it to keep the front end down - he broke something in the steering gearbox (I would assume that it is a tooth or maybe several on one of the shafts), and is suing me to get the purchase price back on the tractor - what are your thoughts? Thanks, Dave
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|