Re: #200 manure spreader and #31 loader

Posted by Butlertrader on February 20, 2005 at 13:32:42 from (209.152.95.51):

In Reply to: #200 manure spreader and #31 loader posted by Kevin on February 13, 2005 at 18:16:34:

I used a 200 that was a 2 wheel pull type behind a Super C for 50 years and it still does the job. Have a problem though, I lost the front idler sprocket for the apron and can't find one anywhere. HELP I can use the spreader anytime I find a gear. Also had the manure loader you talked about with the tine forks in bucket and still have the slide in mounts that go along side the front casting on an H to accept the loader frame and most all the other parts too.

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]