Re: Help with H hydrolics

Posted by Novel Idea Guy on February 28, 2005 at 05:09:36 from (64.80.110.40):

In Reply to: Help with H hydrolics posted by Tony Knappen on February 27, 2005 at 19:35:03:

It would help to know more about it than just "a loader." There are many different loaders that will fit on an H. Most are simple one-way-cylinder, trip-bucket deals, but farmers have been known to throw a curve from time to time and put a more modern loader with two-way hydraulics and a hydraulic-dump bucket on these old tractors.

If you have a simple one-way cylinder, trip-bucket loader, all you need to do is hook the hose coming from the bottom of each cylinder to the front Lift-All port on its side of the tractor's "waist," or torque tube.

If there are hoses coming from the top of the cylinders, those get T'd together and connected to the hydraulic fill tube on top of the torque tube. The tops of the cylinders are used as reservoirs to hold extra hydraulic fluid because the reservoir in the belly of the tractor only holds like 3 quarts, and would run dry filling the cylinders otherwise.

With a more modern loader, all bets are off. It was almost certainly a custom plumbing job using one or two two-way valves, and a maze of pipes and hoses.

Follow Ups:

• Re: Help with H hydrolics Theman 07:21:35 02/28/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]