Re: 1466 Hydraulic Seat Leaking

Posted by SGT K on March 03, 2005 at 02:18:07 from (65.120.161.57):

In Reply to: 1466 Hydraulic Seat Leaking posted by 1466 in IN on March 02, 2005 at 18:15:48:

I fixed mine (so it can"t be too hard). I unbolted the seat by taking off the four 5/16 nuts and I could get to everything pretty easy. I did not replace the dust seal, just the large O-ring, which is in the cylinder that the ram goes in. It wasn"t a bad job at all, of course I"m sure the Vet is right, it would be a lot tighter with a cab.
Good luck
Paul

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]