Re: M engine journal size

Posted by El Toro on March 03, 2005 at 04:11:30 from (64.12.117.13):

In Reply to: M engine journal size posted by Berto1 on March 02, 2005 at 15:08:39:

The rod journals could be 2.4975-2.4985" or 2.5475-2.5485". The mains are 2.7475-2.7484" or
2.8075-2.8085". These are the measurements for
crankshafts when installed in the tractors new.
They may have ground your shaft undersize or it could be worn undersize from use. Have a machine shop to measure the shaft it could be egg-shaped. You do not want to be guessing, you either pay now or pay later if you have too much clearance or not enough on those bearings. It will run another 50 years with proper care. Hal

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]