Re: Fer Allen.. Mah 966 an 300u Thigh maker

Posted by big fred on March 04, 2005 at 06:58:57 from (130.76.32.144):

In Reply to: Re: Fer Allen.. Mah 966 an 300u Thigh maker posted by Sloroll on March 03, 2005 at 19:55:05:

Sloroll, I made those seat cushions. Pretty easy, the bottom was two layers of 3 inch foam on a piece of 3/4 plywood, with some fabric store naugahyde stapled over it. The back was 3 laminations of 1/8 plywood laminated with Weldwood resin glue. When I glued them up I clamped them to a form cut from a 2 by 6 to make the curve. Again, a layer of 3 inch foam with a naugahyde cover. I think the whole works cost me about 12 bucks, and it's oh, so comfy. :o)

Follow Ups:

• Re: Fer Allen.. Mah 966 an 300u Thigh maker Sloroll 07:36:43 03/04/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]