Re: H rod cap torque

Posted by Gordo on March 11, 2005 at 12:08:58 from (64.68.166.234):

In Reply to: H rod cap torque posted by Gordo on March 11, 2005 at 09:12:56:

Sleeves are in. Gave the block a light film of lubriplate, sleeves from freezer got a light coat of syntethetic gun oil. Went in not hard, not easy, just a light coaxing with my heavy rubber mallet and oak scrap wood block. Just for fun I cut it 41/2 inches in diameter on the band saw, 3/4 hole in the middle to store it with the puller!

GordoSD

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]