Re: Some basic questions on my M

Posted by Bob M on March 19, 2005 at 11:49:05 from (69.201.120.79):

In Reply to: Some basic questions on my M posted by Nathan in Texas on March 19, 2005 at 09:24:13:

Nathan - The flap you've shown circled on the flywheel housing is for lubing the clutch throwout bearing. If you swing the flap aside you'll find a zerk fitting recessed behind it. (The "gear" you see inside is the flywheel ring gear...)

As for removing the hood you indeed must remove the muffler. But the air cleaner can stay in place - simply knock the cap/screen off the top of the air inlet (a couple sharp upward whacks with a wood hammer handle and it should pop right off), then lift the hood over the tube. This is most easily accomplished with one person on each side of the hood!

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]