Farmall & IHC Tractors Discussion Board |
diff lock still stuck
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Joe Bloggs on March 27, 2005 at 06:48:29 from (4.250.129.178):
My Ih 454 has the diff lock stuck in. all the external parts move freely when disconected from the end of the linkage that protrudes fron the main housing. so it apears the problem is internal. any one know any thing about this??? the diff lock had not been used in a long time. then I used it the other day to while pulling another tractor out.that time the pedal stuck in the down position but I was able to pull it up while rocking the tractor back and forth. then I used ut while pulling my pickup truck out of a hole and the diff lock stuck in again. this time it wont come out. i tried rocking it. i did what my IH book said,jack up 1 wheel and rock it back and forth. I tried using a lever on the pedal and bent the conecting rod.I tried hammering directly on the tab that is on the rod that sticks out of the housing. but a 4 pound hammer wont move it. help!!!!
Follow Ups:
Home
| Forums
Today's Featured Article -
Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|