Re: 756 t/a

Posted by the tractor vet on April 07, 2005 at 08:22:26 from (4.124.71.14):

In Reply to: 756 t/a posted by scot_c on April 06, 2005 at 19:26:47:

Using the T/A as a way to slow down is the hardest on the low side and this is the #1 cause for taking the low side out . The proper spool valve adjustment is that the snap ring on the stem must touch the nut on the bottom stroke and must travel the full lenght on the up stroke . But since you have been using it to slow down over the years ya got the sprag wore out and the T/A assy. will need to be replaced . If you must slow down and keep the rpm's up at the head lands then use the brakes to load the tractor before ya pull the T/A into the low side and this will help make the T/A last a lot longer .

Follow Ups:

• Re: 756 t/a Allan in NE 08:49:13 04/07/05 (5)
  • Re: 756 t/a the tractor vet 09:48:47 04/07/05 (4)
    • Re: 756 t/a Allan in NE 10:45:45 04/07/05 (3)
      • Re: 756 t/a the tractor vet 11:48:06 04/07/05 (2)
        • Re: 756 t/a Allan in NE 12:35:48 04/07/05 (1)
          • Re: 756 t/a scot_c 14:47:53 04/07/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]