Farmall & IHC Tractors Discussion Board |
Re: 826 engine down
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Repower on April 12, 2005 at 07:42:43 from (64.80.110.33):
In Reply to: 826 engine down posted by todd08 on April 12, 2005 at 01:14:00:
I believe the 815 and 915 combines used the D414/436/466 series engines. They're too long to fit in between the bell housing and radiator. You'd need the entire front end off a '66 series tractor. The IH 715 combine used the German diesel, a D358. You could also use the smaller D312/360 engines, but you still need EVERYTHING that bolts on to the engine to make it work. If you pay a fair price for the engine and all the associated parts, you'll have more into the project than you would if you went out and bought a '66 series in decent condition.
Follow Ups:
Home
| Forums
Today's Featured Article -
Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|