|
Farmall & IHC Tractors Discussion Board |
Service Manual made it sound simple...
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by TomH on April 17, 2005 at 05:32:16 from (206.99.145.54):
The growling noise coming from the transmission in my H got loud enough that I couldn't pretend to ignore it anymore. The manual says something like "Pull the clutch shaft by removing six bolts, then remove the transmission cover plate and unbolt the bearing cases. Transmission my now be lifted out." The guy who wrote that must still get a chuckle out of it. Somehow he forgot to mention that by the time I remove the clutch shaft and transmission, the floor of the shed would be covered with enough iron to start a junkyard. The little roller bearing up front fell out in pieces when the trans was removed, but there doesn't appear to be any other problems. It looks like the worse part of the whole job will be getting the liftall back in place. And I did discover that the throwout bearing has a grease fitting (hiding behind a bent up cover plate).
Follow Ups:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
