Re: FARMALL 140 NOISE?

Posted by Hugh MacKay on April 18, 2005 at 13:55:04 from (209.226.106.28):

In Reply to: FARMALL 140 NOISE? posted by Eric Minnis on April 18, 2005 at 05:05:09:

Eric: On your hydraulic whining check the screen. On the left side of touch control unit just foreward from drain plug is a cover held in by 4 small bolts. Behind that is a cylinder type screen, if dirty could be restricting flow to the pump. The cover and cylinder all one piece. If I were doing this I would drain all hydraulic oil and fill with new Hytran. If you just do screen you will loose some oil anyhow.

On you pto noise get a poor man's stethacsope, just cut off hoe, shovel or broom handle. Start pto running and go over housings placing end of handle different places and other end to your ear. You will soon pinpoint noise. And DON'T cut off your wife's good broom handle.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]