Super A 12V resistors

Posted by Jeb2N on April 21, 2005 at 07:11:03 from (65.40.234.137):

Hey guys, I'm considering rewiring a friend's 12V conversion on his super A. He claims his alternator is not working and I figure that while i'm in there, I may as well do the wiring up right. Currently, he has two of the ceramic resistor blocks in the wiring. One is right after the alternator on the #2 terminal side (could be #1, i didn't get a good look), and the other is right before the coil. I agree that the one near the coil should be there, but i'm curious about the other one.

I've seen several diagrams that use a side panel light, but I don't want to drill a hole for a light and I have no soldering equipment to wire in a diode. I also feel that the diode may ruin the excitation properties of the feed wire. So basically, can anybody show me a complete diagram for the ignition system on a Super A with NO side marker lamp, and no diode, and how big the resistor should be between the Alt and the switch? Any recommendations on radio shack resistors? Assume this is a 6V coil.

Thanks;

Jeb

Follow Ups:

• Re: Super A 12V resistors captaink 08:56:27 04/21/05 (0)
• Re: Super A 12V resistors Bob M 08:05:37 04/21/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]