Re: Super C help

Posted by SCpuller on April 25, 2005 at 14:53:27 from (67.20.16.220):

In Reply to: Re: Super C help posted by CLIFF on April 25, 2005 at 14:01:00:

Cliff, I have pulled in the 3500, 4500, and 5500. It did pretty well in all the classes and even in 5500 i did OK against the bigger tractors(i did not finish last). I only have about 6 runs on the new motor. I used the overbore kit with the step pistons and replaced the valves, but my budget has kept me from being able to do the 3 angle valve job, and porting etc. I run 11.2 x 36 tires and basically have done nothing else to it. I am running an old mag from an A that I had laying around the shop and plan on rebuilding the original dist. with a Pertronix kit. I am looking for some mods that do not require complete disassembly of the motor such as governor upgrade, dist. advance, carb, etc. Thanks Jeff

Follow Ups:

• Re: Super C help CLIFF 05:00:38 04/26/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]