Re: Farmall M front wheels

Posted by farmallhal on May 01, 2005 at 18:30:18 from (64.24.35.16):

In Reply to: Farmall M front wheels posted by John Zakar on April 30, 2005 at 14:49:35:

John, Per Guy Fay's IH Tractor Data Book he goes into the part numbering system used by IHC. The original part no. would have been 8284 and was later revised by the first design change to 8284A but still interchangeable with the earlier part no. Same thing when 8284A was revised again with another design change to 8284B. The new 8284B could still be used in place of a 8284 or 8284A. The hub in my M parts catalog is shown as a 8284DBX which is the 8284DB along with the necessary components to make a ready to install hub assembly consisting of the the hub, seals, retainers, etc. So to answer your question, they can be used together by engineering design and if they couldn't a totally new part no. would have been created to replace the earlier numbers with a tractor serial no. established for the change to the new hub part no. I believe these design revisions were to the hub casting for ease of production or additional strength. I hope this information is what you were looking for. Hal

Follow Ups:

• Re: Farmall M front wheels farmallhal 18:36:35 05/01/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]