Re: What can I do with a High Crop tractor?

Posted by JohnG(TX) on May 06, 2005 at 06:15:46 from (216.136.20.34):

In Reply to: What can I do with a High Crop tractor? posted by JOhnG(TX) on May 05, 2005 at 15:09:48:

OK, guys. Here it is again. I have several M's with implements. I am also going to build an MV 'wannabe' out of a high cotton tractor. I guess what I am wanting to know is, are my mounted implements for the M going to work on the MV'w'? By looking at the cultivators, they might work, but the angle from the pivot to the ground will be greater. Also, the HM-19 Middlebuster looks like it won't work because of the angle. It would pull up and out of the ground. I guess I could build a bracket that will effectively lower the front mounting points so the implement will be at the standard height, but that just ain't right.

So, you folks with the HV's and MV's, what do you do with them?

JG

Follow Ups:

• Re: What can I do with a High Crop tractor? woodcarver Bill 16:00:19 05/09/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]