Re: 5088 hydraulic

Posted by JJK on May 20, 2005 at 22:43:44 from (216.189.131.147):

In Reply to: 5088 hydraulic posted by Bill Hoover on May 15, 2005 at 18:15:41:

The first thing to check is make sure that the flow control levers are in full flow position both in cab and on control valve under cab. The next thing to look at is in the couplers. Do you have the IH couplers yet or have they been converted to the ISO (or Pioneer) style. Look to see if the tips are hammered down so they can't open up all the way and cause restriction to flow. These are things you can check out easily and any thing else you should have sombody that has hands on experience with this system determine whats wrong. Just don't waste your time looking to put in a gear pump system cause they can't put out the volumn for running motors and other hyd's at the same time. Sorry I couldn't answer this sooner, I turn wrenches during the week and don't have a computer at my apartment, so I just check out the site on weekends when I can get to a computer.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]