Re: More on my 48 Cub

Posted by WOD on May 26, 2005 at 06:07:38 from (63.126.250.163):

In Reply to: Re: More on my 48 Cub posted by MagMan on May 25, 2005 at 19:15:09:

Ok I will try to explain further. Again, the magneto has a wire run to it from a coil turning
it into a distributor. When I get to TDC on #1,
the mark on the little gear is at 2 o'clock. I then put the rotor on, pointing the potruding
end in the same direction (2 o'clock). There is
a little ridge on the rotor on the opposite end
from the potruding end and it points to 8 o'clock. Do I have it aligned right?

Thanks,
WOD

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]