Re: Can a 414 engine be put in a 656 Farmall tract

Posted by ChadS on June 03, 2005 at 10:07:26 from (66.228.96.247):

In Reply to: Re: Can a 414 engine be put in a 656 Farmall tract posted by steve aeschliman on June 02, 2005 at 17:57:57:

That suggestion will wake up a 656 for sure! Lots better HP and torque, and easy to swap out. Im not sure if the 656 bellhousing is the same as the M, maybe smaller maybe the same,,, I cant remember. I do know, that you can bolt a M engine plate on the back of a 436 by the top 2 bolt holes where it would usually bolt intothe M bell. Just have to drill the bolt pattern for the bigger engine, or use one from the 1066 if the bellhousings are the same diameter. On the 856's and this conversion,, the flywheel off the hydro's will work on the 436, and be able to use the 806-856 clutch and pressure plate. Chad

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]