Do you measure Carb. float height and drop with t

Posted by John in Ct on June 14, 2005 at 19:33:43 from (69.24.45.21):

THANKS to EVERYONE that helped me with the Carb on my 154 Cub Lo-Boy. I adjusted it and it ran MUCH BETTER but I figure I should take it apart and check the float. I checked that the float height was set at 1 13/32" and added 3/16" to that for the drop (with the top upside down). I had to increase the drop slightly. I measured both times from the gasket surface and NOT the top of the carb. Was I correct to do this?? Thanks!!

Follow Ups:

• Re: Do you measure Carb. float height and drop wi Slappy 03:46:54 06/15/05 (1)
  • Re: Do you measure Carb. float height and drop wi John in Ct 05:38:58 06/15/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]