Re: super m carb serial number

Posted by ChadS on June 15, 2005 at 06:49:47 from (66.228.96.226):

In Reply to: Re: super m carb serial number posted by farmall on June 14, 2005 at 22:03:56:

Should be ok, When you run a hotter 12 volt coil with points, you run a resistor to keep the voltage level down, so it does not burn up the point contacts. Your doing the same thing by using 12 volt coil, and only putting 6 maybe 8 volts of power into it, it does the same thing as the resistor your not feeding the ign the full 12 volts. A good coil to try is the ACCEL super stock coil sold at napa. if your system was 12 volts, you can run this coild with no resitor, and full 12 volts, and not burn up the point contacts. Will work with under 12 volts too. Chad

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]