|
Farmall & IHC Tractors Discussion Board |
Two questions on 460 gas
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ol Chief on June 16, 2005 at 20:20:50 from (63.246.191.215):
I recently bought a Mc C Farmall 460. Constant problem with garbled exhaust.Sometimes missing and backfiring The situation grows worse as rpm increases.Excellent and even compression on all cylinders.I have proper timing,new and good coil points,condenser,dist cap and wires.Cleaned and re-cond carb.and rebuilt the governor.I also had to replace a valve rotator and spring on # 6 cylinder.At this point I am wondering what I have missed.Manifolds are not leaking.Float level checked and OK. Gas flow to carb. is good. Has anyone out there had a similar problem.I am suspecting possibly bad timing gears or valve float.I need suggestions. Second problem is power steering.Power assistance is very poor .This tractor is fitted with a very heavy front loader but I am not certain that this is the cause of the problem.If there is a hydraulic filter in the system please let me know where it is located along with any other advice.I have the repair manuals but cannot locate either one of them.
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
