Farmall & IHC Tractors Discussion Board |
Rebuilt 460D Injection Pump
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ron Smith on June 29, 2005 at 18:23:03 from (207.200.116.203):
Just picked up the rebuilt injection pump for the 460, so it is about ready to go back on. The guy told me that if the injectors are plugged, it could screw up the pump though. If that were the case, it could lock up the pump, so now I am reluctant to put the pump on without checking the injectors out. I guess there is no way to test the injectors on the tractor. (guess that"s correct). They have to be tested with a pop off machine. He said for this tractor, they pop off under fairly low pressure though, so he hasn"t seen too many problems with them. This tractor sat for at least 5 years, so there could be a problem there. The other thing I haven"t figured out entirely is how to set the pump timing (time it to the engine). Since the pump shaft was twisted off, it is way off I"m sure. Looks like there is some type of timing mark on the hub on the end of the pump, but it doesn"t seem to line up with anything. If anybody has any pointers here, I"d sure appreciate it. Thanks
Follow Ups:
Home
| Forums
Today's Featured Article -
Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
Latest Ad:
1997 cub cadet 7275 compact utility tractor 4wd hydro trans cracked block 3500
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|