Re: Farmall H shift linkage problem (expand)

Posted by MagMan on July 10, 2005 at 07:30:51 from (152.163.101.13):

In Reply to: Farmall H shift linkage problem (expand) posted by Julie-AnneP on July 10, 2005 at 05:47:58:

You will most likely need to take the shifter straight up and out there are two little caps under the bell that you need to get out and then a pin that you push out thats under them once you get the shifter out of the way you take a big screwdriver and you need to move the rails all even into nutrel position. If you look with a light you will see. They get stuck in to two gears becuase of the bottom of the shifter gets worn down the fix would be a new shifter or someone rewelding the ball back up on it.
JON

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]