Re: F12/F14 Timing/fail to start

Posted by kfox on July 12, 2005 at 20:35:12 from (63.18.190.212):

In Reply to: F12/F14 Timing/fail to start posted by DA@STL on July 12, 2005 at 18:47:36:

I'd try letting it set overnight and then dumping 2 or three tablespoons of gas down the carb and then crank away, If it fires a few licks you have fuel/ carb problem, if it doesn't fire, you have ignition problem. It's been over 20 years since I rebuilt a couple of F-12s, but never had any problems getting them to run if everything was close to being right. One thing I Remember is that there are two simular marks on the flywheel. One is the timing mark, and I don't remember what the other one was for. You need to get the right mark to set the timing. Make sure the impulse coupling in the mag is working also. ken

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]