Re: Cleaning the engine breather on an H

Posted by Robert in NC on July 15, 2005 at 17:15:41 from (152.121.36.65):

In Reply to: Cleaning the engine breather on an H posted by Dave in CT on July 15, 2005 at 16:07:48:

Completely remove your breather. Take off the oil cup and remove all the oil in it. Take your filter top off. You should see a lot of gunk inside. What I like to do is poor warm kerosene inside and let it soak. Repeat this process until you get most of it out. If it's really gunked up you and completely soak it in a 5 gallon bucket for about 1-2 days. Every now and then move it up and down so your getting the loose stuff out. Let dry and fill your cup back up with new oil. Put it back on and you should be good to go.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]