W9 carb tuning

Posted by Chad Franke on July 21, 2005 at 12:37:27 from (65.112.203.194):

I have my W9 up and running, but having a few little issues. Most are nothing but putting some time in to fixing, but a couple I want to ask about.

The left side steering is loose, the bell crank that the drag link attaches to rotates a little in regards to the spindle. I haven't pulled it apart yet to see, are these parts splined? That would mean that to tighten up would require replacement, correct? Not a big deal, I have a parts tractor now.

Second, what are the standard carb settings? I think it's running a little lean, when pushing dirt, it will start running rough, little bit of choke will bring it out of the rough running. I need to pull the carb apart, think there might be some gunk in there (tractor sat for 5 years, gas drained).

Thanks for any help.

Follow Ups:

• Re: W9 carb tuning El Toro 13:04:01 07/21/05 (3)
  • Re: W9 carb tuning RustyFarmall 13:10:52 07/21/05 (2)
    • Re: W9 carb tuning Chad Franke 05:47:32 07/22/05 (0)
    • Re: W9 carb tuning El Toro 13:16:27 07/21/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]